Home > Bedding > Bed Slat Accessories
Sort By:
Page of 1
Plastic Slat Tensioner 38mm PLASTIC SLAT TENSIONER | 38mm | BEIGE

Plastic Slat Tensioner

Retail Price: $3.78 (3.29 exc GST)
Design Mobel Bed Slat Adjuster PLASTIC SLAT TENSIONER DUO | 53mm & 38mm Width | Yellow

Design Mobel Plastic Slat Tension Adjustor

Retail Price: $3.78 (3.29 exc GST)
Yellow Bed Slat Tension Adjuster BED SLAT TENSION SLIDER | 38mm Width

For 38mm Design Mobel Flexible Slats

Retail Price: $4.05 (3.52 exc GST)
Plastic Slat Tensioner PLASTIC SLAT TENSION ADJUSTOR | 53mm - 55mm Width | BROWN

Adjust the firmness of your slat bed

Retail Price: $4.51 (3.92 exc GST)
BED SLAT SHOE | SINGLE PIVOT | FOR 53mm SLAT BED SLAT HOLDER | SINGLE PIN | FOR 53mm SLAT | PRICED PER EACH

A single pin shoe to enable lateral movement.

Retail Price: $4.60 (4.00 exc GST)
3-Way Bed Slat Spreader 3-Way Bed Slat Spreader

3-Way Bed slat spreader to separate a 3-slat stack of terraced flexible slats within your bed's frame.

Retail Price: $4.92 (4.28 exc GST)
Bed Slat Plastic Cap Holders - 20mm x 20mm Steel Frames Bed Slat Plastic Cap Holders - 20mm x 20mm Steel Frames

Metal tube bed frame, bed slat holders that are typically used on square 20mm x 20mm steel tube furniture frames, beds, sofa's, settee's, divans, futons or pull-out style sofa beds. Fits the European style metal frame furniture.

Retail Price: $5.30 (4.61 exc GST)
Bed Slat Plastic Cap Holders - 30mm x20mm Steel Frames Bed Slat Plastic Cap Holders - 30mm x 20mm Steel Frames

Our slat holder end cap is found on imported metal framed beds, divans, futons or pull-out style sofa bed frames where 2 or 3 sections of slats nest and are pulled out concertina-style to open. Works with both 30mm x 20mm (rectangular) and 30mm x 30mm (square) steel tube frames. This slat holder accepts slats 53-55mm wide and up to 9mm thick. Check the pin positioning carefully, as there are two similar versions of this slat holder available. The distance of the pins to the inside edge of the slat holder is critical - please refer to the technical specifications tab.

Retail Price: $5.30 (4.61 exc GST)
Bed Slat Holder 53mm Width Blue BED SLAT HOLDER - For 50mm to 53mm Width Slats

Traditional European design for 50mm to 53mm wide slats

Retail Price: $6.07 (5.28 exc GST)
Design Mobel EVO 50-53mm Wide Slat Holder Design Mobel EVO 50-53mm Wide Slat Holder

Original Design Mobel slat holder for fitting bed slats of 50mm - 53mm width to wooden bed frames.

Retail Price: $6.61 (5.75 exc GST)
Double Slat Pocket Holder DOUBLE POCKET SLAT HOLDER | For 38mm Width Slats

Manufactured in Europe S38SMGP Flexible Slat Holder

Retail Price: $7.23 (6.29 exc GST)