Home > Furniture Hardware > Furniture Legs > Wooden Legs >

RITZ TAPERED WOOD FURNITURE LEG - 100mm Height | 5/16 Thread
Ritz Wooden Leg 100mm - Mahogany
Hand-stained Mahogany Stain
  
Wholesale Account? Login or Contact Us

Select Leg With or Without Nut



Qty:  
Our wooden Ritz sofa leg will transform your furniture, with its hand-finished, rich dark mahogany stain. Standing 100mm tall, its sleek, curved profile adds a contemporary touch, tapering elegantly from top to bottom. Perfect for updating sofas, chairs, or ottomans. Features a screw-in BSW 5/16" thread for easy installation. Made by New Zealand Craftsman. Choose your preferred option—with or without insert nuts—from the selection table below.

Item# Item Name Retail Price Qty Add
FFWLRTZ100-MIN RITZ TAPERED WOOD FURNITURE LEG - 100mm Height | 5/16 Thread & Insert Nut - 18mm Length - 10.5mm Drill Hole
$66.34 ($57.69 exc GST)
FFWLRTZ100M RITZ TAPERED WOOD FURNITURE LEG - 100mm Height | 5/16 Thread - Leg Only
$64.04 ($55.69 exc GST)
Check the items you wish to purchase, then click


How To Instructions:

How to Replace Furniture Legs When the Thread Size Doesn’t Match


  1. Drill a new hole 30mm away from the old one:
    Fit a 10.5mm drill bit to your drill to create a new hole approximately 30mm away from the existing hole. This spacing keeps the wood strong and avoids weakening the original fixing point.
    Tip: Drill straight and slow to keep the hole clean and properly aligned.
  2. Install an insert nut that matches the new thread:
    Carefully insert the new insert nut into the freshly drilled hole. Make sure it sits flush and is fully secured in the wood. This insert nut will act as the new threaded anchor for your bed leg.
  3. Screw in the new leg or bolt:
    Screw the new bed leg into the new insert nut. Tighten it firmly by hand (or gently with a tool if needed) to ensure a sturdy, seamless replacement.