 |
Small, angled, pressed steel leg plate for attaching legs to small coffee tables, seat bases and tops. Plate fitted to the underside of the frame to accept leg with threaded rod. The angled plate splays the leg out at a slight angle of approximately 10 degrees from the vertical. Specially strengthened with weld around where the nut connects to the plate. Estimated weight loading is 30kg. Minimum order is 4.
- Type: Angled with reinforced weld where nut connects to plate
- Fixing Holes: 3x 5mm
- Thread: 5/16" bsw
- Width: 65mm
- Depth: 63mm
- Height: 10mm
- Metal Thickness: 1mm
- Finish: Zinc Plated
- Sold Per: Each
|
|
|