Zig-zag spring - arc 10g. Zig-Zag Springs are sometimes called Serpentine or No-Sag Springs. These are springs formed from tempered wire, which is then formed into evenly spaced curves or "loops" for a fully supportive seating system

Larger view...




 

ZIG-ZAG SPRING - ARC 10g

Product Code: SPZA10

Zig-Zag Springs are sometimes called Serpentine or No-Sag Springs. These are springs formed from tempered wire, which is then formed into evenly spaced curves or "loops" for a fully supportive seating system. Pitch is measured as the distance between the centre points of one 'U'.  Zig Zag Springs should be used with CONNECTING LINKS or similar (alternatively a sprung platform can be built incorporating both connecting links and EDGE WIRE).  The connected springs are then tied down at either end.  Zig Zag Springs are fastened with single metal Z CLIPS or continous plastic CLIP STRIP and can come in ARC or FLAT options depending on the height of 'crown' required and the overall desired appearance.  ARC springs are available in 9g, 10g and 12g as well as 40m continuous rolls.

Product Selection

Code TYPE GAUGE WIRE DIAMETER LENGTH ('U's) SPAN (mm) WIDTH (mm) PITCH (mm) Price Qty  
SPZA1010 Arc 10g 3.251mm 10u 381mm 45mm 38mm N/A
SPZA1011 Arc 10g 3.251mm 11u 419mm 45mm 38mm N/A
SPZA1012 Arc 10g 3.251mm 12u 457mm 45mm 38mm N/A
SPZA1013 Arc 10g 3.251mm 13u 495mm 45mm 38mm N/A
SPZA1014 Arc 10g 3.251mm 14u 533mm 45mm 38mm N/A
SPZA1015 Arc 10g 3.251mm 15u 572mm 45mm 38mm N/A
SPZA1016 Arc 10g 3.251mm 16u 610mm 45mm 38mm N/A
SPZA1017 Arc 10g 3.251mm 17u 648mm 45mm 38mm N/A
SPZA1018 Arc 10g 3.251mm 18u 686mm 45mm 38mm N/A
SPZR10 Arc 10g 3.251mm 40 metres n/a 45mm 38mm N/A